안녕하세요?

미국 전지역에 글로벌 대기업에 인재채용 서비스를 하고 있는 해드헌팅 회사인 J Headhunting Group 입니다.

알라바마주에 위치한 현대 기아 1차 협력사에서 품질 / Quality Assurance Specialist (신입, 경력)모집합니다.

관심있으신 분들의 지원부탁드립니다.

채용조건 : 경력직 / 한국어,영어 능통하신 분
근무지 : 알라바마
근무형태 : 정규직
급여: 경력에 따라 책정 ( $55K~ )

지원방법: 이메일 / resume2jhg@gmail.com

**제조업, 엔지니어, 품질 경력자 우대**
**STEM OPT 지원 가능**

지원 관련하여 문의 사항이 있으시면 위에 이메일로 연락주시기 바라며, 아래 Job Description 참조하시기 바랍니다.

감사합니다.

Job Description

Title: Supplier Quality Engineer Department: Quality
Reports to: Quality Manager Classification: Salary

Revision Date: 08.02.2016

Scope of Responsibility: Investigate, analyze, and resolve supplier quality problems by conducting audits, analyzing defect trends and leading continuous improvement projects in regard to supplier control. Maintain and monitor suppliers’ performance and report information to the supplier and related departments. Responsible for monthly debit claims to suppliers. Oversee incoming inspection and testing of incoming product in accordance with supplier PPAP and ISIR agreements.

Essential Functions:

• Perform and maintain monthly DMR and supplier chargebacks of non-conforming product with Quality Engineers.
• Co-work with Quality Engineers to coordinate and establish incoming inspection activities.
• Maintain and update incoming inspection logs to conform to IATF16949 and customer requirements.
• Facilitate the testing of incoming supplier material as required in ISIR, PPAP, and customer agreements.
• Maintain all supplier PPAPs and ISIRs documents.
• Maintain and store supplier COAs and inspection reports.
• Create and maintain supplier PPM and score card to provide to supplier and management.
• Maintain KPIs such as supplier PPM and chargeback amounts to be reported on a weekly and monthly basis for management and suppliers.
• Create and maintain supplier audit schedule in accordance with IATF16949 requirements.
• Conduct supplier audits in accordance to audit schedule to drive process standardization, waste elimination and continuous improvements.
• Evaluate new suppliers and existing suppliers for risk assessment to establish necessary incoming requirements. Aide development and manufacturing in the evaluation and of new suppliers.
• Control of supplier non-conforming product in ISOX system.
• Establish short/ long term supplier quality goals.
• Assist Quality Engineers to resolve supplier related issues at customer.
• Champion problem solving and root cause analysis activities with suppliers and customers to eliminate recurrence of non-conformance.
• Responsible for maintaining and acquiring countermeasures from suppliers, along with follow up verification of such activities.
• Serve as a resource to production, logistics and maintenance team members and answer questions and research answers for them.
• Maintain quality files and documentation (hard copies and files in computer system)
• Assist in controlling and disposition of nonconforming product.
• Conduct internal Quality Management System, manufacturing process, product, and layered process audits. Create audit reports and load them to the computer system.
• Email daily reports to quality management staff.
• Assist and perform product sorts and investigation for defective material in house as well as at customer facility.
• Initiate 3rd party sorts and facilitate with suppliers in regard to rejected material.
• Comply with all Environmental, Health and Safety policies and procedures.
• Assist in maintaining measuring equipment inventory/calibration.
• Perform Measurement Systems Analysis to ensure quality of measurement systems.
• Work overtime as assigned by management including movement of shift and/or locations. Must be flexible.
• Any and all other duties as assigned by management.

Additional duties:

• Conduct training on inspection and measurement techniques.
• Conduct investigations per the Quality Engineer/Manager.
• Interact with customer during investigations/containment activities.
• Travel to supplier’s location (domestic and overseas) to resolve quality issues.

Education/ Background/Experience:

1. A Bachelor’s degree in engineering is required for this position.
2. Good knowledge about measuring instruments, gages and measuring methods.
3. Preference given for ability to read blue prints, knowledge about Geometrical Dimensioning and Tolerancing
4. Automotive experience with knowledge about Quality Systems is preferred.
5. Advanced computer skills using Microsoft office applications.
6. Able to read schematics and follow work instructions as well as make independent judgments based on data collected.
7. Good math, written and oral skills, and work well with diverse groups of people.
8. Must have valid driver license in good standing and the ability to travel abroad.
9. Knowledge of various quality system methodologies 8D, Lean, 5 Why, Pareto analysis, Six Sigma, DFMEA, PFMEA, PPAP, etc, preferred.