-
2019-03-0421:53:40 #331211116gs350 68.***.198.150 3143
안녕하세요. 2016 Lexus Gs350 fsport 가지고 있는데요.
오늘 보니까 신호등 정차시 브레이크밟고있을때 rpm이1000 이하에서 약간 바늘이 흔들리는게 보이는데요…
파킹넣어놓고 가만히있어도 약간 알피엠이 떨리네요.
현재 25000마일정도 운행했고, 팩토리워런티도 아직 남아있는데요.구글에 리서치해보니 스로틀바디에 카본슬러지가 끼었거나, 엔진 misfire 등 증상이 있더라구요.
현재까지 사고도 한번도안났고 깔끔한데, 해당증상 랙서스 팩토리워런티로 커버가 가능할까요?
내일아침 서비스 예약은해놨는데, 예약잡아주는 분이랑 통화시에 diagnosis 해보고 커버가능 여부를 결정한다고 하네요.
diagnosis 비용도 렉서스문제면 커버가되는데 아니면 제가 부담해야한다는 식으로 얘기를하네요.
이제 갓 3년된 차고 25000마일밖에 운행하지않은 차인데 이런 현상이 생기니깐 당황스럽네요.혹시 글 읽으시는 분들중에서도 비슷한 증상 경험하신분 계신가요?
계시다면 어떻게 해결하셨는지 궁금하고 동건 워런티로 커버가 될지도 궁금합니다.고수님들 의견 부탁드리겠습니다.
읽어주셔서 감사합니다.
-
-
25000마일인데 차가 벌써 그러면 앞으로 잔고장은 많이 나겠네여.. 일본차들 10년전만해도 내구성좋았는데 지금 내구성이 많이 나빠졌다고 하더라구여…
-
참 잘해써요!
-
말씀하신 것처럼, 스로틀 밸브의 카본 찌꺼기가 보통 원인인게 맞습니다. 찌거기 제거 케미컬이나, 분해후 청소로 제거가 가능하고요
보통 미국에서는 보증 범위에 들어갈겁니다. 그리고 카본 찌꺼기의 경우 미연소가 원인이고 또는 연료의 문제 가 큽니다.
차량의 내구성과는 무관합니다.
운행조건 또는 운전방법이 어떻게 되시나요? 한번 생각해보시고요.
점검하실때 점화플러그 (불꽃을 일으켜 연소를 유도하는 )도 한번 요청해보세요. 점화 플러그 역시 보증범위에 들어갈 가능성이 있으니… 4기통이면 4개의 점화플러그 6기통이면 6개 가 들어갑니다. 점화 케이블은 괜찮을 겁니다. -
Fsport면 LFA스타일 디지털 tach일텐데 바늘움직이는건 항상 있었는데
원글님이 지금 눈치채신겁니다.
내구성이니 카본슬러지니 하기전에
여기있는사람들 타는 그 어느차도 고정알피엠이란 존재하지않습니다.
다만 아날로그 Tach 의 경우는 작은 알피엠변동 오차범위에서 평균값을
바늘이 표시하는거구요, 렉서스의 디지털Tach 는 바늘을 그림으로 그렸다뿐이지 직접 숫자로표시하는 Tach 랑 다를게없습니다. 그래서 왓다리갓다리 합니다.
디지털중에서도 그 평균값을 바늘로 표시하는것도 있겠습니다만
그럴거면 굳이 디지털을 쓸 이유가없는거죠.저 맨위에 현대딜러가타는 오일새는 소나타만해도
디지털게이지로 Tach 물려보면
아이들링 +-20-30 사이에서 왓다리갓다리 할텐데
그거보면 아주 거품물고 쓰러질듯.-
아날로그 tach 경우는 작은 알피엠 변동 오차범위에서 평균값을 바늘이 표시한다구??? wow do you even know what the needle is there for in the thermometer? they are designed to control the transmissions effectiveness in the exhaust that is designed by the program inside the car. how can you say it points to average difference of RPM in the diameter? i have no idea why you are showing off with these untrue knowledges
-
Its tachometer not thermometer u dumbass.
Your retarded ass is looking at Revolution per minute, in matter of seconds.
ITS RPM. KEYWORD : PER MINUTE.
Almost every analog tach needle is calibrated to represent the value, per minute.
Analog needle simply does not have the quickness and precision to show every
Little adjustment ur engine is doing. So it shows the calibrated average number.
(Per seconds or less)And it does not have anything to do with the exaust flow
And you dont work for Hankook Tire. So Stfu-
I’m not arguing that it shows the calibrated average number. what I’m saying is that the RPM that you see in basically everyones car and the needle is directly programmed by the car manufactuer’s program SW, and depending on what kind of SW the car uses, it had different type of affects on your transmission and engine. the needle and the RPM has direct relationship to your engine. This case is true for every car
-
Ugh didnt ur retarded comment started off with questioning the
Fact that Analog Tachs show average value?And didnt i just friggin say Revolution per minute????
Isnt it so fucking obvious that it relates to the engine? Duhhh?Transmission has nothing to do with this OP cuz he was on Parked idling.
Please see a doctor u really need to. -
bro,
plez get it thru your head, the transmission in the car and the OP is directly related to each other because of the speed of the RPM. RPM dictates the speed of the car thats why the more gas you press, your car goes faster. revolution per minute cannot stand to have any fluctuation at any cause in a vehicle…
-
Number one, never call me a fucking bro. U and i have no relations what so ever.
Number two, the OPs car is at parked idle.
That means there is no throttle input you retarded fuck.
Therefore the rpm sits at pre-determined idle speed.
His issue has nothing to do with the transmission. -
alright this is crazy, what he is saying is that under the 1000 rpm, he can see the needle shaking violently, this means that either his tire is out of rotation or his transmission engine has an issue. he needs to get his car diagnoised, your comment of rpm sitting at common speed makes no sense, as his car may expierence some serious issue in the future due to his needles in the rpm
-
어래? 이거 완전 ㅈㅓㅇ신병자 아녀? tachometer rpm 하고 speedometer vehicle speed 하고 차이도 모르는거같네?
그리고:
You say “he [OP] can see the needle shaking violently”.
근데 원글 actually said: “rpm이1000 이하에서 약간 바늘이 흔들리는게 보이는데요…”, “가만히있어도 약간 알피엠이 떨리네요”… 니맘대로 거짓 쿠오트 같다붙이지 마라 잉?You say: “either his tire is out of rotation (sic) or his transmission engine has an issue.”
푸헐”tire is out of rotation”????? wtf is that??? wtf is “transmission engine”??
I think you need to get your brain diagnosed. -
bk plez read this articlle I posted.
https://www.physicsforums.com/threads/how-does-the-throttle-affect-the-rpm-of-an-engine.832029/
this article clearly states the relationship between the rpm and the cars engine and how it can affect the car’s transmission system as well as possibility of tire being out of rotation and car not being balanced. I’m not trying to argue I’m just trying to correct what is false as far as knowledge in the auto industry field is concerned
-
Go see a doctor. Really.
THE CAR WAS ON IDLE YOU RETARDED FUCK.
The transmission is not the reason why op is seeing rpm go
Slightly up and down.
Now fuck off and die you psychopath faggot -
the rpm going slight up and down means there is a tire out of rotation or issue with program in the engine. I had the exact same situation as the writer before and my car had stopped I drove the G37 at the time and it happened to me. like the exact same situation. how do you explain that? you can’t just say things based on your own experience, someone like me who had knowledge in the auto industry can only help out these people.
-
Can u explain how exactly you were born?
I mean, is someone intellectually disabled in your family?
No offense, just trying to understand if ur really psychologically challenged.
Actually there are a few people around me that are willing to help.
Do you want their number so you can call them up and see where it goes?Remember, the first step to a better life is admitting your limits.
-
like I said before I’m an engineer. please just tell me how you think your observation is correct for this writer’s concerns above. I mean how? I just read your answer and I could not understand if your statement was correct… that’s why I just jumped in and wanted to correct that… that’s all.. I have no issues.. all I’m saying RPM and the needle stabilization that he is experiencing is due to potential tire unbalancing or issues with transmissions
-
아 징하다.. 어케 이런넘이 엔지니어? 어처구니가 없네..
근데 참 신기한게, 아무리 얼토당토 안해도 타이어 로테이션으로 빠지는거 보면 게시판 귀신 씌었는게 분명. ㄷㄷㄷ
-
-
+1 for “And you dont work for Hankook Tire. So Stfu” lmao
-
I bet “지나가다” is confused with his half-ass knowledge on OBD2 closed-loop control of short-term fuel trim with O2 reading from exhaust.
I think bk is 100% right. A little fluctuation of RPM at idle is always present – it is feedback controlled anyway. The degree of the fluctuation, however, is what matters when you can say it’s a problem or not.
-
-
-
-
Holy!! xxing Gear heads! so much passion and love.. wondering if OP got all these info thru his head. haha. Suggest OP to post vid of shaking needle to clear the floor here. But let’s not bring in unfortunate, innocent family members here. That’s a low blow in my book.
-
짝퉁 bk가 그동안 내가 쌓아온 명성을 다 허무네.
저 위 bk는 짜 가 니까 알아서들 제끼세요. 완전 또라이 랍니다. ㅉㅉ-
니가 진퉁이면 차얘기로 껴봐한번.
명성같은 겨털라이타로지지는소리하고 앉앗네 정신병자가
-
-